TGX10 DSP power amplifier 4x2500W, live
TGX10 DSP power amplifier 4x2500W, live
A 4-channel touring DSP power amplifier delivering 4 x 2500 W into 4 ohm, with 96 kHz FIR Drive and an on-board touch screen.
Put the whole front-of-house rig in one rack space. The TGX10 drives four channels at up to 2,600 W each into 2 ohms, with Class D output and a damping factor over 400 for tight low end. Onboard DSP runs 32/40-bit floating-point processing — up to 1,025-tap FIR, full crossovers, and per-channel limiters — fed by analog, AES3, or redundant Dante. Source supervision fails over automatically when a feed drops. Touring rigs, festivals, and fixed installs that can't afford a surprise.
Key features
One box, four channels
up to 2,600 W per channel into 2 ohms with a damping factor over 400.
Process on board
32/40-bit floating-point DSP with up to 1,025-tap FIR and per-channel limiters.
Feed it anything
analog, AES3, and redundant primary/secondary Dante on etherCON.
No silent failures
AES3 lock and Dante supervision switch over automatically when a source drops.
Drive it from the front
3.5" color TFT, rotary encoder, and capacitive touch screen.
Test from the amp
built-in sine and noise generator, impedance measurement, and load monitoring.
The flagship for live sound amplification
TGX Series Amplifiers
Complete the System
Where this unit fits, and what it pairs with.
productPage.features
Festival-grade power, the TGX10 puts 2500 W into 4 ohm on each of four channels, up to 3000 W into 2.7 ohm, with a native 96 kHz DSP, FIR Drive, and a full-color touch screen for control at the rack. OMNEO carries Dante and OCA, speaker EQ, crossover, and alignment delay up to 2000 ms shape every output, and supervised front-to-rear fans keep it cool under load.
Along with unprecedented power density, they offer Dynacord’s signature audio quality, advanced reliability and power efficiency. Engineered and manufactured in Germany, TGX amplifiers are built as the ultimate amplification solution for large-scale live performance sound applications. They embody several proprietary amplifier technologies developed by Dynacord engineering, one of the most experienced R&D teams in the audio industry.
- Touring power: 2500 W into 4 ohm per channel across four channels, up to 3000 W into 2.7 ohm.
- No laptop needed: full-color touch screen controls the amp directly at the rack.
- Processing built in: 96 kHz DSP with FIR Drive, speaker EQ, crossover, and alignment delay to 2000 ms.
- Networked audio: Dante and OCA (AES70), fully controlled in SONICUE
- Runs cool under load: temperature-controlled, supervised front-to-rear fans in 2U.
productPage.info.specs
Overview & Features
- Configuration
4-channel
Acoustic Performance
- Frequency Response
20 Hz to 20 kHz (±0.5 dB)
- THD+N
< 0.05 %
- Crosstalk between channels (dBA)
< -80 dB
- Signal-to-Noise Ratio
112 dB
Power & Amplification
- Total Output Power*
10000 W